Wastewater Evaporators & Wastewater Recovery systems

Lakeview Hot Shot models are electric heated wastewater evaporators. Electricity is an attractive alternative for industrial evaporation because of its convenient hookup and ease of operation. This heat source is especially attractive if off-peak hours of electrical rates are available.

The external side mounted heating elements never contact the wastewater, assuring long heating element life. Side mounting allows for efficient heat transfer without any insulating effect from sludge accumulating on the bottom of the evaporator tank. High density, foil backed insulation prevents heat loss to the surrounding environment. Hot Shot evaporators are constructed with thermocouple protected elements to monitor and report on operation, incorporating system shut down if temperature limits are exceeded. Higher evaporation rates can be achieved with the H/O (high output) units within the same footprint.

Lakeview provides custom wastewater evaporation systems designed with the correct options to meet the requirements of your specific waste stream.

Lakeview Model E-100 H/O HS is rated to evaporate up to 12 gallons (45 liters) per hour, 45 amps @ 480V.

LAKEVIEW EVAPORATORS -- STANDARD SPECIFICATIONS / FEATURES
Evaporator tank - 10 gauge, 316L stainless steel standard
Evaporator heating elements - side mounted externally

Access lid and blower lid - stainless steel construction for all wetted parts
Evaporator tank insulation - all sides insulated, 2” foil backed 850°F rated, .30 conductivity, .043SI unit
Exhaust blower housing - heavy gauge, tig welded stainless steel, belt driven, greasable pillow blocks
Evaporator impeller - self-cleaning, backward inclined radial blade, stainless steel construction
Evaporator stack connection - 6” I.D. flanged
Blower motor - 3/4hp, 3ph, 1725rpm
Wastewater transfer pump - air operated (1/2") pump float operated ball valve

Evaporator control panel - industrial duty NEMA4 rated enclosures
Wastewater level control - high/low level float microswitch assembly

Coalescing filter - galvanized steel mesh at water vapor exhaust blower inlet

Evaporator clean-out - 4” NPT clean out port at evaporator bottom
Evaporator skimming weir - drains through 2” port
Blower Guard -- safety cage surrounds the blower, blower motor, drive belt, and evaporator stack

(click here - detailed information on Lakeview wastewater evaporator standard specifications/features)

LAKEVEW EVAPORATORS -- STANDARD SAFETY FEATURES
        *    Industrial safety disconnect at evaporator
        *    Air-cooled, counter-weighted access lid
        *    Safety circuitry and manual reset
        *    Safety cage around hot/moving parts
        *    Wastewater temperature monitor
        *    Redundant safety and wastewater level controls

LAKEVIEW EVAPORATORS -- OPTIONAL EQUIPMENT
        *   Special evaporator tank construction
        *    Evaporator exhaust stacks
        *    Remote wastewater level sensors
        *    Overspray/foam control system
        *    Automation package
        *    Skimmer/sludge pump system
        *    Remote tank oil sensing

LAKEVIEW EVAPORATOR -- HOT SHOT SPECIFICATIONS

Hot Shot
evaporation rate

tank dimensions

tank capacity
weight

model gph amps @ 480v length width height max nom lbs

E-100 8 30 57" 44" 71" 200 120 1100

E-100 H/O 12 45 57" 44" 71" 200 120 1150

E-200 17 65 75" 46" 71"
300
200 1400

E-300 24 86 90" 46" 71" 400 300 1800

E-600 40 150 108" 65" 74" 600 450 2500

E-750 55 197 156" 65" 74" 1000 750 3000

E-900 75 255 204" 65" 74" 1200 900 3800